The Fenestration and Glazing Industry Alliance (FGIA) has updated a specification document providing a standardized comparative analysis procedure for determining the structural integrity of window and door products. AAMA 2502-24, Comparative Analysis Procedure for Window and Door Products, an FGIA document, is now available for purchase in the FGIA online store. This document was last updated in 2019.“AAMA 2502 is an engineering procedural document that allows engineers to calculate the structural capacity of fenestration products that vary from tested products in size and design pressure,”...

Three new board members joined the Fenestration and Glazing Industry Alliance (FGIA) Board of Directors during the 2024 Fall Conference in Minneapolis, MN. FGIA welcomes Scott Corley (ODL), Chris Giovannielli (Kawneer Company) and Stacha Reed (Andersen Corporation) to the Board.“We are thrilled the welcome Scott, Chris and Stacha to the Board,” said Janice Yglesias, FGIA Executive Director. “They have years of experience among them, and our Association will benefit from their expertise.”Scott Corley, Glass Products Council (GPC) DirectorCorley has been in product development for over...

The Fenestration and Glazing Industry Alliance (FGIA) has updated a specification and test method intended to model, through accelerated testing, the normal wear that can be expected during the life of a typical AW Class window or door. AAMA 910-24, Life Cycle Specifications and Test Methods for AW Class Windows and Doors, an FGIA document, is now available for purchase in the FGIA online store. This document was last updated in 2016. It was updated by the FGIA Lifecycle Testing Review Task Group.“Since its introduction...

The Fenestration and Glazing Industry Alliance (FGIA) has updated a specification providing a means to determine the chemical compatibility of sealants, liquid applied and self-adhered flashing materials used for the installation of fenestration products. AAMA 713-24, Test Methods to Evaluate Chemical Compatibility of Freshly-Applied Sealants with Freshly-Applied Liquid and/or Self-Adhered Flashing Materials, an FGIA document, is now available for purchase in the FGIA online store. This document was last updated in 2008.“These laboratory screening procedures are intended to provide a basis for evaluating the compatibility...

Registration is now open for the annual Fenestration and Glazing Industry Alliance (FGIA) FENBC Region Technical Summit, taking place November 5-6 in Surrey, BC. This two-day event will feature a welcome reception at a local restaurant, commercial and residential topic coverage, a Product Showcase and opportunities to engage with industry leaders. The November 5 welcome reception will take place at 4:30-6 p.m. at Charcoal and Woodz restaurant. The following day will begin with a continental breakfast at 7 a.m. Sessions will conclude that afternoon at...

With summer’s end and fall temperatures arriving, fire safety comes back into focus, as Fire Prevention Week is recognized October 6-12, 2024, in the U.S. When it comes to a fire emergency, the Window Safety Task Force reminds everyone that doors and windows are the primary and secondary escape routes during an emergency, such as a fire.How prepared are you to escape safely in a fire?“We are all aware that home fires can spread quickly and can be caused by a number of things,” said...

Those participating in the Fenestration and Glazing Industry Alliance (FGIA) 2024 Fall Conference, held in Minneapolis, MN, heard the ways in which the state of Minnesota is leading the nation when it comes to commercial energy codes and efficiency as well as efforts to mitigate the impact of per- and polyfluoroalkyl substances (PFAS) on the environment and local drinking water supply. Both subject matter experts shared what those operating in other states may be able to expect to see in their own jurisdictions down the...

Sustainability was an important theme throughout the Fenestration and Glazing Industry Alliance (FGIA) 2024 Fall Conference, with sessions covering vinyl life cycle assessments (LCAs), the future of environmental product declarations (EPDs) and embodied carbon legislation on the federal and state levels. Expert speakers answered participant questions and shared the latest knowledge on these topics.An Industry-Wide LCA StudyPresenters Nicole Meyer and Marquis Miller (Sustainability Solutions Corporation) led a discussion entitled "How to Use Vinyl Industry LCAs?” which provided an overview of LCAs and shared lessons learned,...

Several training and education opportunities took place during the Fenestration and Glazing Industry Alliance (FGIA) 2024 Fall Conference in Minneapolis, MN, including an informative session on mockup testing in construction, a primer on corrosion and an educational hands-on workshop demonstrating proper application of materials common in fenestration installation, as presented by the FGIA Wall Interface Council.Construction Mockups and TestingA presentation entitled "Construction Mockups & Testing | Overview, Trends, and Best Practices" was led by Christopher Grey, a principal in the Simpson Gumpertz & Heger (SGH)...

A panel discussion at the Fenestration and Glazing Industry Alliance (FGIA) 2024 Fall Conference covered several different uses and trends of safety-focused fenestration and glazing products, ranging from ballistic glass, school security and blast resistance. Information was presented by panelists Lothar Erkens (Winco Window), Matt Manning (Oldcastle Building Envelope) and Vaughn Schauss (Kuraray). Mike Troutman (MI Windows and Doors), Co-Chair of the FGIA Fenestration Safety Committee, moderated the safety panel.Ballistics with Matt ManningManning started by defining ballistic glass as laminated glass that has been designed...